CUAV CAN PMU Power Module Features:10.05V 0.1A accuracy25V/5A regulated output3Maximum support 62V voltage input, 110A current measurement4Self-developed ITT algorithmWeight0.15 kgDimensions4.6 3.8 2.2 cmProcessorSTM32F412 100Mhz 512K flash 256K RAMVoltage
Flash Sale Ongoing
CUAV CAN PMU Power Module Features:
10.05V 0.1A accuracy
25V/5A regulated output
3Maximum support 62V voltage input, 110A current measurement
4Self-developed ITT algorithm
| Weight | 0.15 kg |
|---|---|
| Dimensions | 4.6 3.8 2.2 cm |
| Processor |
STM32F412 100Mhz 512K flash 256K RAM |
| Voltage input |
6-62V(2-15S) |
| Max current |
110A |
| Voltage accuracy |
0.05V |
| Current accuracy |
0.1A |
| Resolution |
0.01A/V |
| Max output power |
6000W/90S |
| Max stable power |
5000W |
| Protocol |
UAVCAN |
| Operating temp |
-20~100 |
CAN PMU is a drone power management module withbuilt-in STM32F4 processor; running CUAV ITT compensation algorithm, can accurately measure the voltage and current of the drone; support6~62Vvoltage input, and the POWER portcan output5V/8A. It uses advanced CAN bus communication andsupports the standard DroneCAN protocol; each PMU uses factory-level calibration to ensure good consistency and high accuracy.
Main Parameter |
|
| Processor | STM32F412(32 Bit Arm Cortex -M4, 100MHz, 512KB FLASH, 256KB RAM) |
| Voltage Input | 6 ~ 62V(2 ~ 15S) |
| Max Current | 110A |
| Voltage Accuracy | 0.05V |
| Current Accuracy | 0.1A |
| Resolution | 0.01A/V |
| Max Output Power | 6000W/90s |
| Max Stable Power | 5000W |
| Power Port Output | 5.4V/5A |
| Protocol | DroneCAN |
| Operating Temp | -20 ~ 100 |
| Firmware Upgrade | Support |
| Calibration | Factory calibration |
| Interface Type | IN/OUTXT90(Cable/Amass 8.0(Module Power5025850670 CANGHR-04V-S |
| Size | 46.5 38.5 22.5mm |
| Weight | 76g |
Reviews
There are no reviews yet.