Feature

• Supports 2-14S & 200A Cont, 400A Burst
• DroneCAN Communication Protocol
• Small & Compact Design
• Two 5V Output with Independent BEC IC and Circuitry
• Separated Sensor and BEC Board to Minimize Electrical Noise Interference
• Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
• High Accuracy TemperatureSensor for Temperature Monitor

• High-Efficiency Aluminum Heat Dissipation Shell

Specifications

• ProcessorSTM32F405RG 168MHz 1024KB Flash 196KB RAM
• Voltage input: 7~60.9V (2S~14S)
• Continuous current:200A
• Burst current
  • 400A @ 25 1 sec
  • 1000A @ 25 < 1 sec
• Max current sensing: 376A
• Voltage accuracy: 0.1V
• Current accuracy: 5%
• Temperature accuracy:1
• Power port output: 5.3V/3A each port
• Protocol: DroneCAN
• Operating temperature :-25~85
• Firmware upgrade: Support
• Calibration: Support

Pinout

Interface Type

• Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
• Battery IN/OUT Options:
  • XT90 Connectors
  • Tinned Wires
  • XT90 & Ring Terminals
    

Status LED

• Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
• Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
• Flashing slowly (one-second intervals): CAN is successfully connected

Mechanical Spec

• Size: 45mm41mm26mm (Not Include Cable)
• Weight: 185g (Include Cable)